(05-05-2016, 06:11 PM)RiderLibertas Wrote:

(05-05-2016, 05:57 PM)grezz Wrote: I had reported this problem to zero when she first uploaded the kit - she said that the body was rotated on the z axis at some point (probably after it was bound) and messing with the sliders somehow makes it jump back.

I've fixed it om my installation, in a rather roundabout way, by exporting the body then deleting it from the kit. I then loaded the kit (minus the body) into the latest blender/avastar combo (2.77/17.2) - this actually updated the armature to the new latest version. I then imported the body I exported earlier and bound it to the armature.

That's how I did it, but I suppose that if you don't want to upgrade you could export the body and delete it, delete the aramature, add a new avastar avatar (without triangles) then import the body again and bind it.

I don't think I have the skills to do this.  I have the updated blender/avaster.  I exported the Lara body for use in MD so I have that.  I don't know how to import the Lara body and bind it to the avastar armature though.  Anyone know if there is a tutorial anywhere on how to do that?

(05-05-2016, 06:41 PM)grezz Wrote:

(05-05-2016, 06:11 PM)RiderLibertas Wrote:

(05-05-2016, 05:57 PM)grezz Wrote: I had reported this problem to zero when she first uploaded the kit - she said that the body was rotated on the z axis at some point (probably after it was bound) and messing with the sliders somehow makes it jump back.

I've fixed it om my installation, in a rather roundabout way, by exporting the body then deleting it from the kit. I then loaded the kit (minus the body) into the latest blender/avastar combo (2.77/17.2) - this actually updated the armature to the new latest version. I then imported the body I exported earlier and bound it to the armature.

That's how I did it, but I suppose that if you don't want to upgrade you could export the body and delete it, delete the aramature, add a new avastar avatar (without triangles) then import the body again and bind it.

I don't think I have the skills to do this.  I have the updated blender/avaster.  I exported the Lara body for use in MD so I have that.  I don't know how to import the Lara body and bind it to the avastar armature though.  Anyone know if there is a tutorial anywhere on how to do that?

They're the skills you need to use the kit in the first place and Zero's 1 hour tutorial should bring you up to speed. You bind the body to the armature in exactly the same way as you do it to bind clothes to the armature. Just make sure that you select keep in the binding options so you don't lose the weights.
Export and import the body by choosing collada from the import/export options. I believe i used the collada (avastar) one - not sure if the other will work for this.
I'll try and make things easier by uploading my blender file though - it's here https://mega.nz/#!iw0khIqJ!aa9IC2D3daVE7kel5l19fkWHoSW2Z7Z9rsv56osZ8KQ

Use at your own risk though - no guarantees I haven't broken anything in the kit when making my changes. Maybe I just haven't found out yet! I do use that blender file to rig clohes that I upload to SL though.

(05-05-2016, 06:41 PM)grezz Wrote:

(05-05-2016, 06:11 PM)RiderLibertas Wrote:

(05-05-2016, 05:57 PM)grezz Wrote: I had reported this problem to zero when she first uploaded the kit - she said that the body was rotated on the z axis at some point (probably after it was bound) and messing with the sliders somehow makes it jump back.

I've fixed it om my installation, in a rather roundabout way, by exporting the body then deleting it from the kit. I then loaded the kit (minus the body) into the latest blender/avastar combo (2.77/17.2) - this actually updated the armature to the new latest version. I then imported the body I exported earlier and bound it to the armature.

That's how I did it, but I suppose that if you don't want to upgrade you could export the body and delete it, delete the aramature, add a new avastar avatar (without triangles) then import the body again and bind it.

I don't think I have the skills to do this.  I have the updated blender/avaster.  I exported the Lara body for use in MD so I have that.  I don't know how to import the Lara body and bind it to the avastar armature though.  Anyone know if there is a tutorial anywhere on how to do that?

They're the skills you need to use the kit in the first place and Zero's 1 hour tutorial should bring you up to speed. You bind the body to the armature in exactly the same way as you do it to bind clothes to the armature. Just make sure that you select keep in the binding options so you don't lose the weights.
Export and import the body by choosing collada from the import/export options. I believe i used the collada (avastar) one - not sure if the other will work for this.
I'll try and make things easier by uploading my blender file though - it's here https://mega.nz/#!iw0khIqJ!aa9IC2D3daVE7kel5l19fkWHoSW2Z7Z9rsv56osZ8KQ

Use at your own risk though - no guarantees I haven't broken anything in the kit when making my changes. Maybe I just haven't found out yet! I do use that blender file to rig clohes that I upload to SL though.

(05-05-2016, 07:28 PM)Pixel Duster Wrote:

(05-05-2016, 06:41 PM)grezz Wrote:

(05-05-2016, 06:11 PM)RiderLibertas Wrote:

(05-05-2016, 05:57 PM)grezz Wrote: I had reported this problem to zero when she first uploaded the kit - she said that the body was rotated on the z axis at some point (probably after it was bound) and messing with the sliders somehow makes it jump back.

I've fixed it om my installation, in a rather roundabout way, by exporting the body then deleting it from the kit. I then loaded the kit (minus the body) into the latest blender/avastar combo (2.77/17.2) - this actually updated the armature to the new latest version. I then imported the body I exported earlier and bound it to the armature.

That's how I did it, but I suppose that if you don't want to upgrade you could export the body and delete it, delete the aramature, add a new avastar avatar (without triangles) then import the body again and bind it.

I don't think I have the skills to do this.  I have the updated blender/avaster.  I exported the Lara body for use in MD so I have that.  I don't know how to import the Lara body and bind it to the avastar armature though.  Anyone know if there is a tutorial anywhere on how to do that?

They're the skills you need to use the kit in the first place and Zero's 1 hour tutorial should bring you up to speed. You bind the body to the armature in exactly the same way as you do it to bind clothes to the armature. Just make sure that you select keep in the binding options so you don't lose the weights.
Export and import the body by choosing collada from the import/export options. I believe i used the collada (avastar) one - not sure if the other will work for this.
I'll try and make things easier by uploading my blender file though - it's here https://mega.nz/#!iw0khIqJ!aa9IC2D3daVE7kel5l19fkWHoSW2Z7Z9rsv56osZ8KQ

Use at your own risk though - no guarantees I haven't broken anything in the kit when making my changes. Maybe I just haven't found out yet! I do use that blender file to rig clohes that I upload to SL though.

Thank you! This is more familiar territory since I've worked more with the newer avastar. I'm having a difficult time with selections but will try it with a looser garment later after all of this info has had a chance to settle in. Very helpful, thank you.

Quote:So anyone have any luck with my modded file? I'm curious to see whether anyone found it useful.

(05-09-2016, 03:58 AM)kiki00 Wrote: HI! Please can you give the link to the Zero's Maitreya Dev Kit? 
Or by that you mean the MESHES post Zero did few days ago?
I am a bit confused...

(05-05-2016, 06:41 PM)grezz Wrote:

(05-05-2016, 06:11 PM)RiderLibertas Wrote:

(05-05-2016, 05:57 PM)grezz Wrote: I had reported this problem to zero when she first uploaded the kit - she said that the body was rotated on the z axis at some point (probably after it was bound) and messing with the sliders somehow makes it jump back.

I've fixed it om my installation, in a rather roundabout way, by exporting the body then deleting it from the kit. I then loaded the kit (minus the body) into the latest blender/avastar combo (2.77/17.2) - this actually updated the armature to the new latest version. I then imported the body I exported earlier and bound it to the armature.

That's how I did it, but I suppose that if you don't want to upgrade you could export the body and delete it, delete the aramature, add a new avastar avatar (without triangles) then import the body again and bind it.

I don't think I have the skills to do this.  I have the updated blender/avaster.  I exported the Lara body for use in MD so I have that.  I don't know how to import the Lara body and bind it to the avastar armature though.  Anyone know if there is a tutorial anywhere on how to do that?

They're the skills you need to use the kit in the first place and Zero's 1 hour tutorial should bring you up to speed. You bind the body to the armature in exactly the same way as you do it to bind clothes to the armature. Just make sure that you select keep in the binding options so you don't lose the weights.
Export and import the body by choosing collada from the import/export options. I believe i used the collada (avastar) one - not sure if the other will work for this.
I'll try and make things easier by uploading my blender file though - it's here https://mega.nz/#!iw0khIqJ!aa9IC2D3daVE7kel5l19fkWHoSW2Z7Z9rsv56osZ8KQ

Use at your own risk though - no guarantees I haven't broken anything in the kit when making my changes. Maybe I just haven't found out yet! I do use that blender file to rig clohes that I upload to SL though.